Pre Modded Consoles
Installation Services
Assembled Circuit Boards
Installation Instructions
DIY Resources

BAtari 2600 AVMod Board Assembly Instructions

Congratulations on your purchase of the BAtari Atari 2600 AV Mod Kit.

  1. Kit Contents
    Kit Contents

  2. Solder the ICs to board
  3. Be sure to orient the integrated circuits as shown. Note the notch and the dimple placement.  The FMS6409 that ships with the kit will have pin 1 marked with a printed dot.   Some FMS6400s have pin one marked with a tiny notch with a slight bevel on the pin one edge. 

  4. Install the resistors
  5. The resistor values are indicated by color band markings.   There are some substitutions to the silkscreen values:

    Click for larger view.

  6. Install the Capacitors
  7. Install the Trim Pots

  9.  Jumper J1 supplies +5 Volts to Pin 2 of the FMS64xx. If you are using an FMS6406, this jumper is left open.

    This completes the assembly of the Atari 2600 AV Mod Circuit Board. You are now ready to move to the installation instructions.